Çimsataş values your privacy. GPDR Policy
Çimsataş values your privacy. GPDR Policy
HEAT TREATMENT
In our factory, various heat treatment methods are applied by using a number of heat techniques in order to improve the mechanical properties of the parts shaped by forging or casting method, to meet the technical requirements in the place of use and to perform the subsequent operations functionally.
Some equipment is needed to apply these heat treatment techniques. These equipments and techniques to be used are selected by considering criteria such as final or pre-heat treatment requirement, mechanical properties to be obtained, material and dimensions of the workpieces. The heat treatment needs are met by using the following equipment within the framework of the above-mentioned requirements.
- Efco Annealing and Tempering Furnace: It has a capacity of 1 ton/h, conveyor roller type and heated electrically. In general, Annealing – Temper operations of cast parts are carried out.
- Holcroft Annealing and Tempering Furnace: It has a capacity of 1 ton/h, push type and heated electrically. In general, Annealing – Temper and Normalization operations of forged parts are performed.
- Sistem Teknik Annealing - Temper and Isothermal Annealing Furnace: It has a capacity of 1 ton/h, conveyor roller type and heated with natural gas. It can perform Annealing - Temper operation of casting and forging parts, as well as Isothermal Annealing operations of forged parts.
- Isothermal Annealing Furnace: It has a capacity of 1 ton/h, push type and heated electrically. It can perform Isothermal Annealing operations of forged parts.
- Powermax Annealing and Tempering Furnace: It has a charging capacity of 4 tons, chambered type and heated with natural gas. It can perform the Annealing – Temper operation of the cast parts, as well as the Normalized operations of the cast and forged parts.
- Ipsen Furnace: It has a charging capacity of 500 kg, chamber type and heated with natural gas. It can carru out the carburization operations of the finished products, as well as the Annealing - Temper operations of the cast and forged parts.
- Chain Link Induction Machine: It has a power of 200 kW and can perform surface hardening operations of the undercarriage chain links.
- Vertical Induction Bench: It has a power of 200 kW and can perform surface hardening operations of idler and sprocket gears as well as shaft-shaped parts
When all of our furnaces are used effectively, they can meet a heat treatment requirement of 27,000 tons/year.
